PULSE JET BAG FILTER

Dust Laden air enters the dust collector through the hopper or high –entry inlet housing section An internal baffle distributes the dirty air within, the housing ,so as to reduce air velocity and allow heavier particles drop into hopper, while lighter particle collects on the outside surface of the bags For operation of Bag Filters, suction hoods shall be connected to suction take off points. These suction take off points shall be connected to the main ducting by branch ducting and the other end of main ducting shall culminate into Bag Filters. The outlet of Bag Filter to inlet duct of blower and the same will exhaust clean air to atmosphere vide a stack.

Cartridge dust collectors, cassette type Bag Filter

Cartridge collectors use perforated metal cartridges that contain a pleated, nonwoven filtering media. The pleated design allows for a greater total filtering surface area than in a conventional bag of the same diameter, the greater filtering area results in a reduced air to media ratio, pressure drop and also overall collector size. Cartridge collectors are available in single use or continuous duty designs. In single-use collectors, the dirty cartridges are changed and collected dirt is removed while the collector is off. In the continuous duty design, the cartridges are cleaned by the conventional pulse-jet cleaning system. In cassete type rectangular filter bags are used.

Insertable bag filter

Insertable Bag Filters are suitable for direct mounting for bin vent, belt transfer point, bag-dump, mixer ventilation applications etc. The dust laden air is drawn on to the rectangular filter pads where dust is retained on the outside of the fabric. The pad is cleaned by reverse compressed air pulse. The Insertable Bag Filter offered by us does not require any hoppers, ducting, structural supports, etc. The Insertable Bag Filter from bag filter Manufacturer 

Cyclonic bag filter

Cyclonic bag filter designed for collection of all kinds of dry dust, especially fibrous dust. The combination of cyclone and bag filter enables them to handle a very large dust burden, hence they are also well suited for pneumatic conveying and industrial vacuum cleaning Plants. The cylindrical design also makes them suitable for very dusty material like flour from roller flour mills, coal handling plants etc